-
Dec 17,2024
With the continuous advancement of science and technology, medical technology has been significantly improved, and advanced medical equipment continues to emerge, greatly improving the quality of medical services. However, the use of nonlinear devices in hospital power distribution systems may produce harmonic currents that can interfere with the normal operation of the system. The accumulation of...
read more
-
Dec 25,2024
Power quality analysis and improvement measures for cement plants The size of system voltage deviation, the degree of three-phase voltage imbalance, and the reliability of power supply have an important impact on the safe operation and service life of electrical equipment, and are also directly related to the safety, stability and economic operation of the cement plant power system itself. 1. Powe...
read more
-
Apr 24,2025
Analysis of the situation where the system load exceeds the transformer capacity configuration when the transformer and photovoltaic are used at the same time. Phenomenon and cause 1. Power fluctuation superposition: The power generation power of the photovoltaic system is affected by factors such as light intensity and weather conditions, and fluctuates significantly. When there is sufficient sun...
read more
-
May 22,2025
The low power factor of a single-phase circuit will lead to a decrease in equipment efficiency and an increase in line loss. To control the power factor, we need to analyze the causes and take targeted measures. The following are common control methods: I. Common causes of low power factor 1. Mainly inductive loads Equipment such as fluorescent lamps, motors, transformers, etc., need to consume re...
read more
-
Jun 19,2025
The application prospects of static VAR generators (SVG) in China's energy storage industry show significant growth potential, a trend driven by policy support, technological innovation and market demand. The following is an in-depth analysis based on the latest industry dynamics and technological progress: I. Strong support from policies and industry standards National policies clearly list SVG a...
read more
-
Oct 30,2025
Active Harmonic Filter is a high-power, fast-switching electronic amplifier. Its job is to continuously monitor the electrical system and instantly inject equal but opposite "anti-harmonic" currents to cancel out the distortions. This demanding process generates a significant amount of waste heat, and managing this heat is paramount for several key reasons: 1. To Protect the Power Semiconductors (...
read more
-
Nov 04,2025
1. Energy Storage System (ESS) Battert Energy Storage System(BESS) is essentially a large-scale battery installed within the electrical grid. Primary Function: To store electrical energy and release it when needed. Key Applications in a Substation: Peak Shaving: Charging during low-demand (low-cost) periods and discharging during high-demand (high-cost) periods, reducing strain on the grid and sav...
read more
-
Dec 09,2025
The correct selection of capacitor banks, SVG (Static Var Generator), and active power filters (APF) and external current transformers (CTs) directly affects the measurement accuracy, response speed, and overall operational performance of the compensation/filtering device. The following details how to correctly select these components, covering both general principles and specific considerations f...
read more
-
Dec 10,2025
The Variable Frequency Drive (VFD) is a powerhouse of modern industry, enabling precise motor control and dramatic energy savings. Yet, this efficiency comes with a hidden electrical toll: harmonic distortion. The Active Harmonic Filter (AHF) is the critical solution that neutralizes this threat, ensuring system reliability and clean power. The Harmonic Challenge from VFDs A VFD's operation—conver...
read more
-
Feb 07,2026
Below is a partial list of our shipments over the past two weeks at the end of the year： 1. Africa High Voltage Outdoor Water Cooling Statcom FAT and Delivery 2. Eastern European Static Var Generator and Active Harmonic Filter 3. Southeast Asia LV APFC 4. Latin American MV APFC(13.8kV)
read more
-
Apr 01,2026
Product Uses: Intelligent reactive power compensation capacitor banks are "energy-saving experts" in power systems. Their main functions are: Compensating for reactive power losses in the power grid, improving the power factor, and avoiding power factor penalties for the power sector; (B) Reducing line losses and improving the power supply efficiency of the power grid; Stabilizing the power grid v...
read more
-
Apr 10,2026
Application:The intelligent reactive power compensation capacitor bank serves as an "energy-saving specialist" in power systems. Its primary functions include: （1）Compensating for reactive power losses in the grid, improving the power factor, and avoiding penalties imposed by power authorities for low power factor; （2）Reducing line losses and enhancing the pow...
read more
-
Apr 13,2026
First, remember this easy-to-remember mnemonic for on-site recall: 1. Ask about the symptoms; 2. Inspect the appearance; 3. Disconnect the fault in sections; 4. Measure parameters; 5. Test run to prevent recurrence. Step 1: Ask (Understand the Fault Symptoms) First, ask the operator to clarify the situation before starting any work: When did it break down? How did it break down? Were there any unu...
read more
-
Apr 21,2026
Cycloconverters – the direct AC-to-AC power conversion circuits – hold a special place in high-power, low-speed applications like rotary kilns, mine hoists, and ship propulsion systems. Unlike conventional rectifier-inverter combinations, cycloconverters adjust output frequency without an intermediate DC link. However, this direct conversion comes at a cost: complex power factor behavior and prono...
read more
-
Apr 22,2026
Capacitor compensation cabinets can effectively improve the power factor of the power grid, save energy, and improve power supply quality. Power factor refers to the percentage of apparent power in a power grid that is used to supply active power. In the operation of a power grid, a higher power factor is desirable. If this is achieved, most of the apparent power in the circuit will be used to sup...
read more
-
Apr 28,2026
The Electrical Industry is Undergoing a Transformation! Four Core Technologies Supporting the Future of New Power Systems With the advancement of "dual-carbon" goals and the accelerated implementation of new power systems, the electrical industry has long since moved beyond the old model of "traditional operation and maintenance," ushering in a profound transformation towards greening, intelligenc...
read more
-
May 05,2026
In power systems, transformers, as core equipment, undertake the crucial task of voltage conversion. However, due to manufacturing defects, environmental factors, and long-term operational wear, various faults frequently occur—oil leakage, abnormal oil levels, damage to the oil conservator bladder, deformation of the cooling system, and abnormal internal noises are common problems. These issues no...
read more
-
May 18,2026
I. Core Analysis: The Feasibility of Frequent Transformer Tap Adjustments The essence of transformer tap adjustment lies in altering the turns ratio of the high-voltage winding to regulate the transformation ratio, thereby controlling the output voltage to accommodate fluctuations in grid load or deviations in system voltage. However, this regulation is not an operation that can be performed arbit...
read more
