-
Dec 05,2019
What's the Definition of Power Factor? Power Factor Definition: Power factor(PF for short) is the ratio between KW and KVA drawn by an electrical load where the KW is the actual load power and the KVA is the apparent load power. It is a measure of how effectively the current is being converted into useful work output and more particularly is a good indicator of the effect of the load current on th...
read more
-
Dec 18,2019
Single busbar compensation Overview An installation with a single LV busbar is that most often encountered. This type of installation requires that the reactive power can change with respect to the methods defined previously. Compensation uses all the receiving devices of the installation and the amperage of the current transformer is determined according to the total current conducted through the...
read more
-
Jan 10,2020
STATCOM will be utilized in the night for power factor correction and voltage control at the terminals of an induction motor operating at poor power factor. PV solar farms produce power during the day and are completely idle in the nights. The proposed new control on PV solar system will help in increase the utilization of the PV solar system. A key component of the PV solar plant is a voltage sou...
read more
-
Feb 03,2021
HV/MV Power factor correction is directly related to the different aspects that assist the technical management of transport and distribution networks. These are: Power quality This involves the increase in the levels of voltage in substation busbars and line ends. Optimisation of the installation's cost of operation In other words, the decrease of the reactive energy and, therefore, the reduction...
read more
-
Mar 20,2021
A capacitor bank is a grouping of several identical capacitors interconnected in parallel or in series with one another. These groups of capacitors are typically used to correct or counteract undesirable characteristics, such as power factor lag or phase shifts inherent in alternating current (AC) electrical power supplies. FEATURES: Power factor correction by multi step design Standard & detu...
read more
-
Oct 15,2021
Overview Rapid growth of inductive electric loads on utility networks has impacted the efficient operation of AC electrical transmission and distribution grid by increasing the need for reactive power (VAr/kVAr/MVAr) that are required to be supplied with active power. Install capacitor banks to reduce the reactive power demand from point of generation to point of use in high voltage networks. Brin...
read more
-
Jan 10,2022
ZDDQ Low Voltage Capacitor Bank for Reactive Power Compensation Reactive power compensation, is a technology that improves the power factor of the power grid in the power supply system, reduces the loss of power supply transformers and transmission lines, improves power supply efficiency, and improves the power supply environment. Therefore, the reactive power compensation device is in an indispen...
read more
-
May 27,2022
ZDDQ low voltage automatic capacitor banks improves power factor in networks with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equip...
read more
-
Jul 05,2022
Step–less reactive compensator –STATCOM Static Synchronous Compensator (STATCOM) hasearned its name as it does not have any rotating or moving parts, and yet offers a fast and step-less reactive compensation. It is based on voltage source converter (VSC) technology, which uses low-voltagecells in series to realise a high voltage output By controlling the output voltage to be either higher or lower...
read more
-
Aug 22,2022
The application of distribution system capacitor banks has long been accepted as a necessary step in the design of distribution feeders. Design considerations often include traditional factors such as voltage support, power factor, and released capacity. However, as customer systems evolve through the use of power electronics, the distribution system design of the future will include power quality...
read more
-
Jun 05,2023
Static Var Generator (SVG) is an electronic reactive power compensation system, for both capacitive and inductive power. Static Var Generator (SVG) is an electronic reactive power compensation system, for both capacitive and inductive power. It has the same operating principle as an active filter; the SVG injects a current in the opposite direction to counteract the installation's non-useful power...
read more
-
Oct 14,2023
ZDDQ-LV APFC Low voltage reactive power compensation refers to the process of correcting or improving the reactive power in a low voltage electrical system. Reactive power is the power associated with reactive components, such as inductive or capacitive loads, in an alternating current (AC) circuit. In an AC power system, both real power (measured in watts) and reactive power (measured in vo...
read more
-
Nov 04,2023
Efficient goods delivery requires effective coordination, communication, and careful handling of the items being transported. It is crucial for businesses to select reliable logistics partners, implement appropriate tracking systems, and ensure proper packaging and labeling to minimize the risk of damage or loss during transit. Our ZDDQ technical team has analyzed and suggested solutions for forei...
read more
-
Nov 09,2023
We are ZDDQ, a professional manufacturer of Power Quality Products since 2001. Today, let's talk about the Fixed Reactive Power Compensation. Reactive power compensation refers to a method of compensating for reactive power in an electrical system using fixed-value reactive power devices. It involves the installation of passive components, such as capacitors or reactors, that provide a predetermin...
read more
-
Dec 02,2023
ZD-GWJ Medium Voltage(3kV~24kV) group automatic reactive power compensation device automatically switches capacitor banks according to the voltage and reactive power of the power supply bus, and performs reactive power compensation by tracking load changes, thereby providing power factor, improving power supply quality, and reducing power consumption. It is often installed in front of the control ...
read more
-
Dec 09,2023
The low-voltage automatic compensation capacitor cabinet produced and developed by ZD DQhas been successfully installed at the customer's site. The customer's problem of low power factor was successfully solved, and the power factor reached 0.95 after compensation. Thanks again to our customers for their trust and support.
read more
-
Jan 11,2024
STATCOM (Static Synchronous Compensator) is a power electronic device used in electrical power systems for voltage control and power factor correction. In a solar farm, the main functions of a STATCOM are as follows: Voltage Regulation: Solar farms typically operate at high voltages, and fluctuations in solar irradiation and load demand can cause voltage variations. STATCOMs can regulate the volta...
read more
-
Jan 19,2024
Power Factor Control refers to the management and maintenance of an acceptable power factor in electrical systems. Power factor is the ratio of real power (kW) to apparent power (kVA) in an electrical circuit. A low power factor indicates that the circuit is inefficient and requires more current to deliver a given amount of power. This results in increased energy losses, higher electricity bills, ...
read more
