-
Sep 28,2024
The low-voltage power distribution system consists of a distribution substation (usually reducing the transmission voltage of the power grid to the distribution voltage), a high-voltage distribution line (i.e., a voltage above 1 kV), a distribution transformer, a low-voltage distribution line (a voltage below 1 kV), and corresponding control and protection equipment. Generally includes: Main equip...
read more
-
Oct 08,2024
Static Var Generator (SVG) modules and panels are essential components in reactive power compensation systems, designed to improve power quality and stabilize voltage in electrical networks. Here's an overview of both: 1. SVG Modules Function: These are the core components responsible for providing dynamic reactive power compensation by injecting or absorbing reactive power in response to varying ...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
-
Nov 13,2024
In the power supply system, reactive power compensation can improve the power factor of the power grid, reduce the loss of power transformers and transmission lines, and improve the power supply environment. Reasonable selection of compensation devices can minimize the loss of the power grid and improve the quality of the power grid. If the selection or use is improper, it may cause many problems ...
read more
-
Dec 06,2024
Low-voltage SVG (Static Var Generator): A key compensation device for power systems In modern power systems, power quality is a crucial aspect. With the development of industry and the increase of various complex power loads, the balance of reactive power in the power grid has become increasingly critical. As an advanced reactive compensation device, low-voltage SVG (static var generator) plays an...
read more
-
Mar 25,2025
Low-voltage static VAR generator (SVG) and low-voltage capacitor cabinet are both devices used for reactive power compensation, but there are many differences in working principle, performance characteristics, application scenarios, etc., as follows: Working principle Low-voltage SVG: Based on power electronics technology, by controlling power devices such as IGBT, the DC side electric energy is c...
read more
-
May 26,2025
Both capacitor banks and filter banks are used in low voltage (LV) power systems for reactive power compensation and power quality improvement, but they serve different primary purposes. 1. Low Voltage Capacitor Banks Purpose: Reactive power compensation (power factor correction) Voltage support (reduces line losses and improves efficiency) Components: Capacitors (fixed or switched) Contactors/thy...
read more
-
Aug 19,2025
When multiple modules of an active power filter are operated in parallel, slow response and reduced filtering effectiveness are often related to imbalances in core aspects such as inter-module coordinated control, signal synchronization, and current distribution. The specific causes can be analyzed from the following aspects: Ⅰ. Insufficient inter-module synchronization accuracy Multiple modules i...
read more
-
Sep 10,2025
1. Electrical Resonance What is Resonance? In an AC circuit, electrical resonance is a condition where the inductive reactance (X_C) become equal, canceling each other out. This leaves only the circuit resistance (X_L = 2πfL): Opposition from inductors (e.g., motors, transformers). Increases with frequency. Capacitive Reactance (f_r) This is the specific frequency where f_r = 1 / (2π√(LC)) Wh...
read more
-
Oct 30,2025
Active Harmonic Filter is a high-power, fast-switching electronic amplifier. Its job is to continuously monitor the electrical system and instantly inject equal but opposite "anti-harmonic" currents to cancel out the distortions. This demanding process generates a significant amount of waste heat, and managing this heat is paramount for several key reasons: 1. To Protect the Power Semiconductors (...
read more
-
Dec 10,2025
The Variable Frequency Drive (VFD) is a powerhouse of modern industry, enabling precise motor control and dramatic energy savings. Yet, this efficiency comes with a hidden electrical toll: harmonic distortion. The Active Harmonic Filter (AHF) is the critical solution that neutralizes this threat, ensuring system reliability and clean power. The Harmonic Challenge from VFDs A VFD's operation—conver...
read more
-
Feb 07,2026
Below is a partial list of our shipments over the past two weeks at the end of the year： 1. Africa High Voltage Outdoor Water Cooling Statcom FAT and Delivery 2. Eastern European Static Var Generator and Active Harmonic Filter 3. Southeast Asia LV APFC 4. Latin American MV APFC(13.8kV)
read more
