-
Apr 24,2026
Reactive Power Compensation Solution for Chemical Plants 1. Problem Background and Requirements Chemical plants typically operate numerous inductive loads, such as large motors (pumps, compressors, fans), transformers, variable frequency drives, and electric arc furnaces. During operation, these devices consume significant amounts of reactive power (Q), leading to the following issues: Low power f...
read more
-
Apr 30,2026
Is there a hidden trick in the electricity bill? The secret path to saving 30% on losses by improving the power factor from 0.7 to 0.95. I.The Impact, Benefits, and Improvement Principles of Power Factor: A building materials factory incurred an annual electricity cost overrun of 500,000 yuan due to a power factor of only 0.7—this is not an isolated case! During power supply, the user's power fact...
read more
-
May 08,2026
1.What is Harmonics? In power systems, the fundamental cause of harmonics is the presence of non-linear loads. When current flows through a load and does not maintain a linear relationship with the applied voltage, a non-sinusoidal current is formed, meaning harmonics are generated in the circuit. Harmonic frequencies are integer multiples of the fundamental frequency. As proven by the French math...
read more
-
May 25,2026
1. Introduction Three-phase unbalance is a prevalent power quality issue in low-voltage distribution systems, mainly caused by dispersed single-phase loads, charging piles and residential electricity consumption. Two mainstream solutions are widely used in the industry: mechanical relay phase-switching balancers and IGBT-based active compensation devices (SVG/APF/Active Load Balancer). This articl...
read more
-
Jun 03,2026
As a key piece of equipment for reactive power compensation in power systems, the operating status of capacitor banks directly affects the power factor, voltage stability, and energy efficiency of the power grid. With the rapid development of power systems, capacitor banks, as crucial reactive power compensation equipment, play an irreplaceable role in improving power factor, enhancing grid qualit...
read more
-
Jun 10,2026
In electrical design, reactive power compensation cabinets are centrally installed on the low-voltage side of the power distribution room. The corresponding compensation installation capacity is marked on the drawings. However, due to the differences in the rated voltage of the capacitors, the access voltage at the compensation cabinet, and the reactance of the series reactors, the actual output c...
read more
-
Jun 18,2026
Choose the right one, not the most expensive one. This principle also applies to reactive power compensation. In the power industry's reactive power compensation process, the selection of high-voltage reactive power compensation equipment has always been crucial. Today, we'll discuss the applicable scope of high-voltage reactive power compensation equipment. In the context of reactive power compen...
read more
-
Jun 23,2026
Understanding Four-Quadrant Reactive Power Compensation Controller The four-quadrant reactive power compensation controller solves this pain point with full-range PQ vector detection. It accurately distinguishes four operating modes: grid supply with inductive loads, grid supply with capacitive loads, on-site power generation with inductive reactive power, and grid feedback with capacitive reactiv...
read more
-
Jul 03,2026
Many charging station operators have a question: when charging piles are charging normally, the power factor is perfectly within the standard range, and there are no problems even without capacitor banks or SVG. However, when the station is newly built, there is little traffic, or there is no one charging at night, the power factor inexplicably exceeds the standard, resulting in power factor adjus...
read more
