-
May 29,2024
Active filters and passive filters are two types of filters that are often used in electronic circuits. Although they can both be used to filter certain frequencies in electrical signals, there are some different differences between them. 1. Working Principle Passive filters mainly rely on passive components (such as capacitors, inductors, resistors, etc.) to filter signals. They can only process ...
read more
-
Jun 13,2024
When an oscillating system is subjected to periodic external force, the amplitude of the oscillation increases sharply when the frequency of the external force is the same as or very close to the natural oscillation frequency of the system. The frequency at which resonance occurs is called "resonance frequency". In electrical engineering, the resonance phenomenon of an oscillating circuit. The res...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 29,2024
The preventive measures for the capacity attenuation of power capacitors are crucial in the application of power capacitor banks. Here are some of the main preventive measures: Control operating conditions: Temperature control: Ensure that the capacitor operates within the temperature range recommended by the manufacturer. Excessive temperature will accelerate the aging of the internal materials o...
read more
-
Aug 09,2024
690V 3 phase 3 wire networks A 690V 3-phase 3-wire network refers to an electrical power distribution system that operates at 690 volts between each line conductor, without a neutral wire. This type of network is commonly used in industrial and commercial applications where the loads do not require a neutral connection or where power is distributed primarily to large motors, equipment, or machiner...
read more
-
Sep 05,2024
Application of reactive power compensation device SVG: Power system: SVG can be used for reactive power compensation and voltage regulation of power system to improve the stability and reliability of power grid. It can help power system reduce power loss, improve voltage quality, and improve power factor and efficiency of power grid. Industrial field: SVG can be used for reactive power compensatio...
read more
-
Sep 24,2024
What is the reason of resonance in power networks? Resonance in power networks occurs when the inductive and capacitive elements of the system interact in a way that amplifies specific frequencies, leading to excessive voltage or current oscillations. Here are the primary reasons for resonance in power networks: 1. Impedance Matching Resonant Frequency: Every electrical circuit has a natural reson...
read more
-
Sep 28,2024
The low-voltage power distribution system consists of a distribution substation (usually reducing the transmission voltage of the power grid to the distribution voltage), a high-voltage distribution line (i.e., a voltage above 1 kV), a distribution transformer, a low-voltage distribution line (a voltage below 1 kV), and corresponding control and protection equipment. Generally includes: Main equip...
read more
-
Oct 08,2024
Static Var Generator (SVG) modules and panels are essential components in reactive power compensation systems, designed to improve power quality and stabilize voltage in electrical networks. Here's an overview of both: 1. SVG Modules Function: These are the core components responsible for providing dynamic reactive power compensation by injecting or absorbing reactive power in response to varying ...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
-
Oct 27,2024
Active Load Balancer and Active Power Filter Active Load Balancers and Active Power Filters (APFs) are both power quality devices, yet they serve different roles within electrical networks. Here’s an overview of each, along with their similarities and distinctions: Active Load Balancer Function: Primarily used to ensure balanced loading across all three phases in a power system. Operation: Activel...
read more
-
Nov 13,2024
In the power supply system, reactive power compensation can improve the power factor of the power grid, reduce the loss of power transformers and transmission lines, and improve the power supply environment. Reasonable selection of compensation devices can minimize the loss of the power grid and improve the quality of the power grid. If the selection or use is improper, it may cause many problems ...
read more
-
Dec 06,2024
Low-voltage SVG (Static Var Generator): A key compensation device for power systems In modern power systems, power quality is a crucial aspect. With the development of industry and the increase of various complex power loads, the balance of reactive power in the power grid has become increasingly critical. As an advanced reactive compensation device, low-voltage SVG (static var generator) plays an...
read more
-
Dec 17,2024
With the continuous advancement of science and technology, medical technology has been significantly improved, and advanced medical equipment continues to emerge, greatly improving the quality of medical services. However, the use of nonlinear devices in hospital power distribution systems may produce harmonic currents that can interfere with the normal operation of the system. The accumulation of...
read more
-
Mar 01,2025
I. Industry driving factors 1. Demand for new energy power generation and grid upgrades The volatility and intermittency of new energy power generation (such as wind power and photovoltaic power generation) put forward higher requirements for grid stability, and it is necessary to rely on power quality equipment (such as reactive power compensation and harmonic control) to achieve grid stability....
read more
-
Mar 05,2025
Benefits of harmonic control Improve power quality: Harmonics can distort voltage and current waveforms. Controlling harmonics can make voltage and current waveforms closer to sine waves, provide stable and high-quality power for various electrical equipment, ensure normal operation of equipment, and reduce equipment failures and malfunctions caused by power quality problems. Reduce equipment loss...
read more
-
Mar 25,2025
Low-voltage static VAR generator (SVG) and low-voltage capacitor cabinet are both devices used for reactive power compensation, but there are many differences in working principle, performance characteristics, application scenarios, etc., as follows: Working principle Low-voltage SVG: Based on power electronics technology, by controlling power devices such as IGBT, the DC side electric energy is c...
read more
-
May 26,2025
STATCOM (Static Synchronous Compensator) can help control harmonics, but its primary function is not harmonic filtering. Here's how it relates to harmonics: 1. Primary Role of STATCOM: Reactive Power Compensation: STATCOM provides fast and dynamic reactive power support to regulate voltage and improve power system stability. Voltage Stability: It helps maintain grid voltage by injecting or absorbi...
read more
