-
Jan 19,2024
Power Factor Control refers to the management and maintenance of an acceptable power factor in electrical systems. Power factor is the ratio of real power (kW) to apparent power (kVA) in an electrical circuit. A low power factor indicates that the circuit is inefficient and requires more current to deliver a given amount of power. This results in increased energy losses, higher electricity bills, ...
read more
-
Jan 29,2024
To build a capacitor bank panel, you will need to follow these general steps: Determine the capacitor bank size: Calculate the required capacitance based on the power factor correction needs of your system. Consider factors such as the target power factor, load characteristics, and voltage levels. Select capacitors: Choose high-quality capacitors that are suitable for the desired voltage and curre...
read more
-
Mar 19,2024
Static VAR Compensator At the medium voltage level, one common of reactive power compensation is Static Var Compensators (SVCs). SVCs are typically installed in electrical power systems to regulate the voltage and compensate for reactive power fluctuations. They consist of various components such as thyristor-controlled reactors (TCRs) and thyristor-switched capacitors (TSCs) that can quickly adju...
read more
-
Apr 03,2024
Power factor is an important technical indicator of the power system. It represents the ratio of active power to apparent power in an AC circuit. This ratio is usually expressed as a cosine function (cosφ). The size of the power factor reflects the energy utilization efficiency of the power supply output. If the power factor is too high, that is, the reactive power is too low, it will reduce the r...
read more
-
May 13,2024
The improvement of power quality is mainly through power quality equipment and current signal and other parameters in the current transformer detection system, so as to correctly control the power quality problem in real time and improve the environment of the distribution system. For capacitor bank, we usually only use a CT mounted on the power side for sampling. For SVG / APF, a...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 29,2024
The preventive measures for the capacity attenuation of power capacitors are crucial in the application of power capacitor banks. Here are some of the main preventive measures: Control operating conditions: Temperature control: Ensure that the capacitor operates within the temperature range recommended by the manufacturer. Excessive temperature will accelerate the aging of the internal materials o...
read more
-
Sep 02,2024
Dynamic reactive power compensation Dynamic Reactive Compensation refers to the real-time adjustment of reactive power in an electrical system to maintain optimal voltage levels, improve power factor, and enhance overall power quality. It is essential in modern power systems, particularly in environments where loads fluctuate rapidly or where maintaining a stable voltage is critical. 1. Understand...
read more
-
Sep 28,2024
The low-voltage power distribution system consists of a distribution substation (usually reducing the transmission voltage of the power grid to the distribution voltage), a high-voltage distribution line (i.e., a voltage above 1 kV), a distribution transformer, a low-voltage distribution line (a voltage below 1 kV), and corresponding control and protection equipment. Generally includes: Main equip...
read more
-
Oct 08,2024
Static Var Generator (SVG) modules and panels are essential components in reactive power compensation systems, designed to improve power quality and stabilize voltage in electrical networks. Here's an overview of both: 1. SVG Modules Function: These are the core components responsible for providing dynamic reactive power compensation by injecting or absorbing reactive power in response to varying ...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
-
Nov 13,2024
In the power supply system, reactive power compensation can improve the power factor of the power grid, reduce the loss of power transformers and transmission lines, and improve the power supply environment. Reasonable selection of compensation devices can minimize the loss of the power grid and improve the quality of the power grid. If the selection or use is improper, it may cause many problems ...
read more
-
Dec 06,2024
Low-voltage SVG (Static Var Generator): A key compensation device for power systems In modern power systems, power quality is a crucial aspect. With the development of industry and the increase of various complex power loads, the balance of reactive power in the power grid has become increasingly critical. As an advanced reactive compensation device, low-voltage SVG (static var generator) plays an...
read more
-
Dec 25,2024
Power quality analysis and improvement measures for cement plants The size of system voltage deviation, the degree of three-phase voltage imbalance, and the reliability of power supply have an important impact on the safe operation and service life of electrical equipment, and are also directly related to the safety, stability and economic operation of the cement plant power system itself. 1. Powe...
read more
-
Mar 25,2025
Low-voltage static VAR generator (SVG) and low-voltage capacitor cabinet are both devices used for reactive power compensation, but there are many differences in working principle, performance characteristics, application scenarios, etc., as follows: Working principle Low-voltage SVG: Based on power electronics technology, by controlling power devices such as IGBT, the DC side electric energy is c...
read more
-
May 22,2025
The low power factor of a single-phase circuit will lead to a decrease in equipment efficiency and an increase in line loss. To control the power factor, we need to analyze the causes and take targeted measures. The following are common control methods: I. Common causes of low power factor 1. Mainly inductive loads Equipment such as fluorescent lamps, motors, transformers, etc., need to consume re...
read more
-
May 26,2025
Both capacitor banks and filter banks are used in low voltage (LV) power systems for reactive power compensation and power quality improvement, but they serve different primary purposes. 1. Low Voltage Capacitor Banks Purpose: Reactive power compensation (power factor correction) Voltage support (reduces line losses and improves efficiency) Components: Capacitors (fixed or switched) Contactors/thy...
read more
-
Dec 09,2025
The correct selection of capacitor banks, SVG (Static Var Generator), and active power filters (APF) and external current transformers (CTs) directly affects the measurement accuracy, response speed, and overall operational performance of the compensation/filtering device. The following details how to correctly select these components, covering both general principles and specific considerations f...
read more
