-
May 06,2024
What is nonlinear load? A nonlinear load is a load whose current is not proportional to its voltage. Since some electronic components, such as transistors and diodes, exhibit nonlinear characteristics when operating, in actual power consumption, some electrical equipment connected to the load will deform the current waveform. This deformation causes the voltage to distort and generate additional f...
read more
-
May 13,2024
The improvement of power quality is mainly through power quality equipment and current signal and other parameters in the current transformer detection system, so as to correctly control the power quality problem in real time and improve the environment of the distribution system. For capacitor bank, we usually only use a CT mounted on the power side for sampling. For SVG / APF, a...
read more
-
May 29,2024
Active filters and passive filters are two types of filters that are often used in electronic circuits. Although they can both be used to filter certain frequencies in electrical signals, there are some different differences between them. 1. Working Principle Passive filters mainly rely on passive components (such as capacitors, inductors, resistors, etc.) to filter signals. They can only process ...
read more
-
Jun 13,2024
When an oscillating system is subjected to periodic external force, the amplitude of the oscillation increases sharply when the frequency of the external force is the same as or very close to the natural oscillation frequency of the system. The frequency at which resonance occurs is called "resonance frequency". In electrical engineering, the resonance phenomenon of an oscillating circuit. The res...
read more
-
Jul 01,2024
First of all, the operation of inductive equipment must establish a magnetic field (such as a motor). Since the instantaneous start-up of large equipment requires the power grid to provide a large amount of Reactive Current to establish a magnetic field, the voltage of the system will be greatly reduced at the moment of equipment startup, causing other equipment to be protected or unable to operat...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Aug 09,2024
690V 3 phase 3 wire networks A 690V 3-phase 3-wire network refers to an electrical power distribution system that operates at 690 volts between each line conductor, without a neutral wire. This type of network is commonly used in industrial and commercial applications where the loads do not require a neutral connection or where power is distributed primarily to large motors, equipment, or machiner...
read more
-
Sep 05,2024
Application of reactive power compensation device SVG: Power system: SVG can be used for reactive power compensation and voltage regulation of power system to improve the stability and reliability of power grid. It can help power system reduce power loss, improve voltage quality, and improve power factor and efficiency of power grid. Industrial field: SVG can be used for reactive power compensatio...
read more
-
Sep 10,2024
What is the relation of Static var generator and Carbon reduction? Static Var Generator (SVG) plays a significant role in reducing carbon emissions by improving the efficiency of electrical systems. Here's how SVGs contribute to carbon reduction: 1. Improved Power Factor SVG help improve the power factor of an electrical system by providing reactive power compensation. A low power factor leads to ...
read more
-
Sep 24,2024
What is the reason of resonance in power networks? Resonance in power networks occurs when the inductive and capacitive elements of the system interact in a way that amplifies specific frequencies, leading to excessive voltage or current oscillations. Here are the primary reasons for resonance in power networks: 1. Impedance Matching Resonant Frequency: Every electrical circuit has a natural reson...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
-
Oct 27,2024
Active Load Balancer and Active Power Filter Active Load Balancers and Active Power Filters (APFs) are both power quality devices, yet they serve different roles within electrical networks. Here’s an overview of each, along with their similarities and distinctions: Active Load Balancer Function: Primarily used to ensure balanced loading across all three phases in a power system. Operation: Activel...
read more
-
Dec 17,2024
With the continuous advancement of science and technology, medical technology has been significantly improved, and advanced medical equipment continues to emerge, greatly improving the quality of medical services. However, the use of nonlinear devices in hospital power distribution systems may produce harmonic currents that can interfere with the normal operation of the system. The accumulation of...
read more
-
Dec 25,2024
Power quality analysis and improvement measures for cement plants The size of system voltage deviation, the degree of three-phase voltage imbalance, and the reliability of power supply have an important impact on the safe operation and service life of electrical equipment, and are also directly related to the safety, stability and economic operation of the cement plant power system itself. 1. Powe...
read more
-
Mar 01,2025
I. Industry driving factors 1. Demand for new energy power generation and grid upgrades The volatility and intermittency of new energy power generation (such as wind power and photovoltaic power generation) put forward higher requirements for grid stability, and it is necessary to rely on power quality equipment (such as reactive power compensation and harmonic control) to achieve grid stability....
read more
-
Mar 05,2025
Benefits of harmonic control Improve power quality: Harmonics can distort voltage and current waveforms. Controlling harmonics can make voltage and current waveforms closer to sine waves, provide stable and high-quality power for various electrical equipment, ensure normal operation of equipment, and reduce equipment failures and malfunctions caused by power quality problems. Reduce equipment loss...
read more
-
May 22,2025
The low power factor of a single-phase circuit will lead to a decrease in equipment efficiency and an increase in line loss. To control the power factor, we need to analyze the causes and take targeted measures. The following are common control methods: I. Common causes of low power factor 1. Mainly inductive loads Equipment such as fluorescent lamps, motors, transformers, etc., need to consume re...
read more
-
May 26,2025
STATCOM (Static Synchronous Compensator) can help control harmonics, but its primary function is not harmonic filtering. Here's how it relates to harmonics: 1. Primary Role of STATCOM: Reactive Power Compensation: STATCOM provides fast and dynamic reactive power support to regulate voltage and improve power system stability. Voltage Stability: It helps maintain grid voltage by injecting or absorbi...
read more
