-
Jun 16,2021
Power factor penalty in power bills We've found that many people struggle to understand how Power Factor (PF) impacts demand charges. Frequently, end use customers pay a significant premium each month in demand charges because their PF is below a threshold set by the utility in the rate tariff. Oftentimes its not obvious to the untrained eye when there are extra charges associated with a bad PF on...
read more
-
Jul 22,2021
An example of how to calculate the capacity of reactive power (kVAr)? An Motor is supplying a load of 700 kW at a P.F (Power factor) of 0.65. What size of Capacitor in kVAr is required to raise the P.F (Power Factor) to unity (1)? And how many more kW can the motor supply for the same kVA loading when P.F improved. Supplying kW = 700 kW Original P.F = Cosθ1 = 0.65 Final P.F = Cosθ2 = 1 θ1 = C...
read more
-
Aug 24,2021
Why does the power factor need to be corrected at MV? Reactive power compensation is essential for the correct technical and economical management of an MV Networks. Its benefits are: Economic benefits — Reduced billable reactive energy costs (surcharges by country and tariff) — Reduced hidden economic cost from the Joule effect in transport lines — Enables a better use ratio (kW/kVA) for installa...
read more
-
Sep 13,2021
Benefits by installing power factor correction systems? Power factor correction systems provide much benefit: Reduced electricity utility bills Your electric utility provides working (kW) and reactive power (kVAR) to your plant in the form of apparent power (kVA). While reactive power (kVAR) doesn’t register on kW demand or kW hour meters, the utility’s transmission and distribution system must be...
read more
-
Oct 09,2021
Power capacitors are very beneficial in power networks. They provide reactive power required by motors, transformers, etc. This increases the transmission capacity and reduces losses thanks to higher power factors. They enable the power factor targets of the utilities to be met. Power capacitors and series reactors are also a key component in various filter solutions that reduce harmonic cont...
read more
-
Oct 15,2021
Overview Rapid growth of inductive electric loads on utility networks has impacted the efficient operation of AC electrical transmission and distribution grid by increasing the need for reactive power (VAr/kVAr/MVAr) that are required to be supplied with active power. Install capacitor banks to reduce the reactive power demand from point of generation to point of use in high voltage networks. Brin...
read more
-
Oct 28,2021
ZDDQ-AHF Active Harmonic Filter ZDDQ Active Harmonic Filter(AHF) is used to improve Power Quality through autonomous detection and dynamic filtering of harmonic currents present in power grid. ZDDQ Active Harmonics Filter is a perfect comprehensive solution to power quality problems with power grid such as harmonic wave, reactive power, and three-phase load unbalance. ZD AHF is connected in parall...
read more
-
Nov 13,2021
ZDDQ products offer a power quality solution, which allows users to select features to meet their applications needs. The capacitor bank offers customers system benefits such as: • Improved Power Factor • System capacity release • Reduced losses • Improved power flow • Cost savings Capacitors are needed in the different parts of the network as part of reactive power compensation and...
read more
-
Nov 22,2021
Reliable power distribution is needed to guarantee patient health and save lives in hospital. Continuity and reliability of power supply are extremely important in hospital.UPS,Generator,Medical devices include high volume of harmonics current, and can impact the distribution system in hospital. ZDDQ Active Harmonics Filter Based on the broad knowledge and experience in terms of solutions and appl...
read more
-
Dec 25,2021
Merry Christmas to all our friends.
read more
-
Feb 18,2022
Thanks for Pakistan Client's trust and support. 300A Active Harmonic Filter Panels.
read more
-
Jun 30,2022
The benefits of power factor correction 1.Savings on the electricity bill Power factor correction eliminates penalties on reactive energy, decreases demand on kVA, and reduces power losses generated in the transformers and conductors of the installation. 2.Increased available power Fitting PFC equipment on the low voltage side increases the power available at the secondary of a MV/LV transformer. ...
read more
-
Aug 09,2022
ZDDQ-SVG Static Var Generator is an electronic reactive power compensation system, for both capacitive and inductive power. It has the same operating principle as an active filter; the SVG injects a current in the opposite direction to counteract the installation's non-useful power (inductive and capacitive), thus ensuring that the target cosϕ is achieved. ZDDQ SVG instantly compensates and adjust...
read more
-
Aug 22,2022
The application of distribution system capacitor banks has long been accepted as a necessary step in the design of distribution feeders. Design considerations often include traditional factors such as voltage support, power factor, and released capacity. However, as customer systems evolve through the use of power electronics, the distribution system design of the future will include power quality...
read more
-
Sep 08,2022
ZDDQ Low Voltage Capacitor Banks provide a cost-effective, user friendly, reliable solution for power factor correction. They are a more efficient alternative to individual motor capacitors, especially in large industrial facilities. ZDDQ Power Factor Correction Panels are designed to provide power factor correction with a single installation on the main plant bus and are ideal for applications wh...
read more
-
Sep 29,2022
The ZDDQ SVG module we exported to Colombia in mid-September has been put into use and installed in an airport power distribution room somewhere in Bogota, and the compensation effect is good. The two modules are: 440V 60Hz 40kvar(50A) SVG Module and 440V 60Hz 80kvar(100A) SVG Module.
read more
-
Dec 05,2022
Reactive Power in Inductive Loads Inductive loads such as chokes, motors, inductive heating equipment, generators, transformers, and arc welding equipment produce an electrical lag that is commonly referred to as inductance. This inductance causes a phase difference between current and voltage. As a result of phase shift due to inductance, there are times when current and voltage have different si...
read more
-
Mar 17,2023
ZDDQ Active Power Filter Exported to Lebanon. We are ZDDQ, which is a professional designer and top manufacturer of power quality field. And we focus on power quality improvement and power factor correction since 2001. In recent years, our business sector in the Middle East has gradually expanded, and more and more customers choose to use ZDDQ products. The following is a 100A active harmonic filt...
read more