-
Dec 12,2023
FGSVG from ZDDQ or Windsun STATCOM for distributed power now supports any requirement from 1MVAr to 50MVAr. It joins our wide portfolio of products, systems, and solutions meeting STATCOM needs up to 500MVAr Static VAr Generator. Installing a STATCOM at the suitable points in a grid will increase power transfer capability by enhancing voltage stability and maintaining a smooth voltage profile unde...
read more
-
Dec 12,2023
FGSVG Statcom (static synchronous compensator), is a dynamic reactive compensation device parallelly used on transmission networks. Statcom, usually called as SVG(Static Var Genertor) uses power electronics to form a voltage-source converter that can act as either a source or sink of reactive AC power to an electricity network. It is a member of the FACTS family of devices. FGSVG Statcom covers fr...
read more
-
Dec 12,2023
Wide application of sudden-change loads with nonlinear characteristics causes the need for special devices to provide normative values of power quality parameters, since the reactive power consumed from the network, voltage fluctuations (flicker), harmonic distortions, unbalance of voltages, etc.have a negative impact on the networks and reliability of power supply to consumers ‘ equipment. One of...
read more
-
Dec 12,2023
FGSVG SVG(Static Var Generator) STATCOM converters are designed for applications where reactive power control is needed to meet the requirements of national grid codes or where voltage must be regulated to improve the stability of the power grid. Follow Project is the water cooled 33kV 8MVAr Statcom.
read more
-
Dec 12,2023
FGSVG SVG(Static Var Generator) STATCOM converters are designed for applications where reactive power control is needed to meet the requirements of national grid codes or where voltage must be regulated to improve the stability of the power grid. Follow Project is two sets Air cooled 11kV 5MVAr Statcom.
read more
-
Dec 12,2023
FGSVG Statcom (static synchronous compensator), is a dynamic reactive compensation device parallelly used on transmission networks. Statcom, usually called as SVG(Static Var Genertor) uses power electronics to form a voltage-source converter that can act as either a source or sink of reactive AC power to an electricity network. It is a member of the FACTS family of devices. Following project is th...
read more
-
Dec 21,2023
What is Statcom? STATCOM stands for Static Synchronous Compensator, in China, we named it as high voltage Static Var Generator. It a power electronic device in electrical power systems provide voltage support, reactive power compensation, improved power quality. STATCOMs are typically connected to the grid at the point of common coupling (PCC) and act as shunt-connected voltage source c...
read more
-
Dec 28,2023
The principle of a STATCOM (Static Synchronous Compensator) is to provide reactive power compensation and voltage control in an electrical power system. It is a type of power electronics-based device used in power systems to improve the stability and quality of electrical power. The STATCOM operates by regulating the flow of reactive power in the power system. Reactive power is required for magnet...
read more
-
Jan 02,2024
STATCOM (Static Synchronous Compensator) is a device used in power transmission systems to regulate voltage and provide reactive power support. It is a type of FACTS (Flexible AC Transmission System) device that actively controls the flow of electric power and improves the performance of the transmission system. The main function of a STATCOM is to control the reactive power flow in the power grid...
read more
-
Jan 05,2024
STATCOM (Static Synchronous Compensator) and capacitor banks are both used for reactive power compensation in power transmission systems, but they have some key differences and advantages. Advantages of STATCOM over capacitor banks: Fast Response: STATCOM provides faster response times compared to capacitor banks. It can regulate the reactive power output almost instantly, making it suitable for c...
read more
-
Jan 05,2024
In the context of STATCOM (Static Synchronous Compensator), the choice between a Delta (Δ) connection and a Star (Y) connection depends on several factors. Here are some considerations: Voltage Level: Delta connection is typically used for high or medium voltage systems, while Star connection is more commonly used for low and medium voltage systems. The choice depends on the voltage range of the s...
read more
-
Jan 19,2024
Power Factor Control refers to the management and maintenance of an acceptable power factor in electrical systems. Power factor is the ratio of real power (kW) to apparent power (kVA) in an electrical circuit. A low power factor indicates that the circuit is inefficient and requires more current to deliver a given amount of power. This results in increased energy losses, higher electricity bills, ...
read more
-
Jan 29,2024
To build a capacitor bank panel, you will need to follow these general steps: Determine the capacitor bank size: Calculate the required capacitance based on the power factor correction needs of your system. Consider factors such as the target power factor, load characteristics, and voltage levels. Select capacitors: Choose high-quality capacitors that are suitable for the desired voltage and curre...
read more
-
Feb 26,2024
Why adjust the power factor of a generator? 1. When the generator is running, the power factor is too high, that is, the reactive power is too low, which reduces the reactive power margin of the system and affects the steady-state stability of the generator. Although the economy is improved, in the long run, this is in exchange for an increased probability of accidents. Once an accident occurs, th...
read more
-
Mar 19,2024
Static VAR Compensator At the medium voltage level, one common of reactive power compensation is Static Var Compensators (SVCs). SVCs are typically installed in electrical power systems to regulate the voltage and compensate for reactive power fluctuations. They consist of various components such as thyristor-controlled reactors (TCRs) and thyristor-switched capacitors (TSCs) that can quickly adju...
read more
-
Mar 25,2024
Photovoltaic power generation, as a new and pollution-free power generation method today, has greatly alleviated the demand for traditional electric energy. However, for the grid-connected photovoltaic power generation system, due to its inherent randomness, volatility, and intermittent characteristics, and the grid-connected photovoltaic power generation system contains a large number of nonlinea...
read more
-
Apr 01,2024
Energy storage has significant potential and offers several opportunities in various sectors. Here are some key chances associated with energy storage: Renewable Energy Integration: Energy storage can facilitate the integration of renewable energy sources like solar and wind power by storing excess electricity generated during periods of high production and supplying it during times of low product...
read more
-
Apr 03,2024
Power factor is an important technical indicator of the power system. It represents the ratio of active power to apparent power in an AC circuit. This ratio is usually expressed as a cosine function (cosφ). The size of the power factor reflects the energy utilization efficiency of the power supply output. If the power factor is too high, that is, the reactive power is too low, it will reduce the r...
read more